User's Manual

intended for use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland,
Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and United Kingdom and within
EFTA in Iceland, Norway and Switzerland.
Locaon of Controls
Charging Port
Indicator LED
Power / Play / Pause
Disco light on/off
First Time Use
Charging the Baery
The VBPARTY Speaker has a built-in, rechargeable lithium-polymer baery. To avoid damage, do not
aempt to remove the baery. The full
performance of the baery is achieved aer
two or three charging-discharging cycles.
Charge the baery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall,
computer, car charger).
3. When the charger is connected to the
speaker, the red indicator light will turn on.
Note: Charging the baery fully may take up
to 2 hours.
4. When the baery is fully charged, the red indicator light will turn off. Disconnect the charger from
the speaker and the outlet. The speaker is ready for use.
Note: Overcharging could reduce the life of the baery. A charged baery will lose its capacity if it is
not used on a regular basis.
Important!
Ensure that the baery is fully charged if the speaker is not used for a long period of me. To avoid a
complete discharge of the baery, charge the speaker at least every six(6) months.
• Use only supplied and manufacturer-approved chargers and unplug this device when not in use for
long periods of me or during lightning storms.
FCC Statement
This device complies with the part 15 of the FCC rules. Operaon is subject to the following two
condions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operaon.
Cauon: Changes or modificaons not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this equipment does cause harmful
interference to radio or television recepon, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separaon between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV technician for help.
EC Declaraon of Conformity
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operaon.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference,
caused by unauthorized modificaons to this equipment. Such modificaons could void the
user's authority to operate the equipment. This product is CE cerfied according to the provision
of the R&TTE Direcve (99/5/EC). This declares that this product is in compliance with the
essenal requirements and other relevant provisions of Direcve 1999/5/EC. Please note that
this product uses radio frequency bands not harmonized within EU. Within the EU this product is
Thank you for purchasing the Vivitar® VBPARTY Bluetooth® Speaker.
Introducon
With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth®
technology. It also pairs with other Bluetooth-enabled devices (Bluetooth V4.2+EDR specificaon and
A2DP and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V3.0+EDR
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: A2DP, AVRCP
• Operaon Range: Up to 33 feet(10 meters)
• Play Time: About 2 hours
• Standby Time: About 20 hours
• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion Baery
• Charge Time: About 2 Hours
In the Box
• VBPARTY Bluetooth® Speaker
• USB Charging Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all instrucons.
• To avoid damage or malfuncon of the speaker do not drop it from high locaons and/or on to
hard surfaces, do not place heavy objects on it.
• Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate as this
may cause an electrical shock, explosion and damage to the device or to the user.
• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves or
any other apparatus that produces heat. This may cause an explosion, degrade the performance
and/or reduce baery life.
• Do not modify, repair or disassemble device (especially the baery). Doing so will void the
warranty. The baery in this device may present a risk of fire or chemical burns if misused or
tampered with.
Vivitar® VBPARTY
Bluetooth® Speaker User Manual

Summary of content (2 pages)