Bluetooth Speaker UP TO 4 HOURS PLAYTIME † RECHARGEABLE BATTERY VF60016BT USER’S MANUAL
Important Safety Precautions When using your Vivitar Boombox Wireless Speaker, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER. 2. Do not use your speaker near water. Clean using a soft cloth or paper towel. 3. Do not place your speaker on any wet surfaces. 6. Always press all buttons or switches carefully. Do not manhandle your speaker. 7.
Introduction Thank you for purchasing your Vivitar Boombox Wireless Speaker, item VF60016BT. Your speaker is compatible with most smartphones and Bluetooth. In order to get the best results Package Contents -Vivitar VF60016BT Boombox Wireless Speaker -USB Charging Cable -3.
A Quick Look On/Off Switch Charging Port Auxiliary Port
Charging Your Speaker Your speaker has a built-in, rechargeable lithium Ion battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is only achieved after a few charging-dis- 1. Connect one end of the included USB charging cable to the charging port on your speaker. Then plug the other end of the USB charging cable into a USB port on your computer or a suitable power adapter in order to recharge the internal rechargeable battery. 2.
Pairing Your Speaker with a Bluetooth Device Your speaker can be paired with most Bluetooth devices including iPads, iPhones, and most smartphones, and tablets. In order to pair your speaker with a device, follow the steps below: 1. Slide the On/Off Switch to the ON position in order to turn on your speaker. The LED indicator light will turn blue and blink rapidly to indicate its in pairing mode. 2. Go into the Bluetooth settings screen on your phone. Connect “ VF60016BT” under available devices. 3.
Using Your Speaker 1. Slide the On/Off Switch to the ON position in order to turn your speaker ON. If you have already paired your speaker to your Bluetooth device, they will automatically remain paired each time you power on your speaker. 3. To use your speaker with devices that are not Bluetooth enabled, plug one end of a standard 3.5mm audio cable into the Auxiliary Port on your speaker. Plug the other end into the headphone jack on your audio device.
Maintenance and Care -Before using your speaker, inspect the ports to make sure that they are clear of dust and debris before charging or inserting an AUX cable. -Use a soft cloth to clean your speaker. Never use any harsh chemicals or detergents. Make sure your speaker is dry before using. -When your speaker is not in use, it should be stored in a cool, dry place. -Never tug or yank on either USB charging cables or AUX cables while they are connected to your speaker.
FCC Statement void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Vivitar One Year Warranty This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
Vivitar One Year Warranty (continued) NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.
