English CONTENTS I Getting to know your camera……………………..1 1. Configuration & installation…………………..….1 2. Monitor screen display……………….….…….2 3. Preparation before capture……………………..2 4. Shooting……………………………………………3 5. Video& Audio recording…………………….…7 6. Audio input /output………………………………..8 7. Image review setup……………………….…..10 8. Other setup………………………………………12 II Software & Download………………………………15 1 PC-CAM driver installation…………………..15 2 How to use PC CAM function…………………22 3 How to download the photos………………....
English I Getting to know your camera 1.
English 2. Monitor screen display 3. Preparation before capture 3.1 Battery It’s optional to use AAA alkaline batteries or rechargeable batteries. Open the battery cover and load the batteries according to the polarity indicated on the battery door. 3.2 Insert the memory card Insert the memory card to the card slot carefully. Check the right direction before insert the memory card. Attention: If you can not insert the SD card, take it out and insert again.
English 4. Shooting 1): Press POWER button to enter the default capture mode; 2): Press the SHUTTER button to take pictures. Attention: z Do not take the memory card or battery out when camera is saving the image, otherwise, the image won't be saved completely. z The screen will power off automatically if the camera is not in working status for 30 seconds. Press any key to restart the screen. 4.1 Review photos Press PLAYBACK button to view the pictures.
English A. Resolution: to select the “resolution” mode, a) Press the UP or DOWN button then press the RIGHT button for 5 options : 2592*1944 ， 2048*1536，1600*1200，1280*960，640*480. Press the UP or DOWN button to select the resolution . b) press the “OK” button to confirm and press “MENU” button to exit. B. Quality: to select “Quality” and press a) Press the UP or DOWN button the RIGHT button for 3 options: “Super”, “Fine”, “Normal”. b) Press the UP or DOWN button to select the image quality.
English E. Exposure: a) Press the UP or DOWN button press the RIGHT button to select; to select “Exposure”, and then b) Press the LEFT or RIGHT button to adjust the exposure from -2.0 to +2.0; then press the “OK” button to confirm. F.
c) English Press the “OK” button to confirm and press the MENU button to exit. Flashlight Auto: Automatically turn on/off to the light according Flash on: Force on the flash Flash off: Force off the flash In capture mode, press the FLASH button to adjust the flash mode. ● The screen is in blank when the flash is in charge status, the next image can be shot only when the charge is completed. ●If shooting with flash under a bright environment, the facular in the image will cause the incorrect exposure.
English 5. Video recording: 1): Press the “MODE” button to select video mode“ ”; 2): Press the SHUTTER button to start video recording; 3): Press the SHUTTER button again to stop recording. 5.1 Play video files a) Press the PLAYBACK button to view the video file. b): Press the LEFT or RIGHT button to select the video file; c): Press the SHUTTER button to play video file and press the SHUTTER button again to end the playing; d): Press the OK button to pause, press it again to continue.
English b) Press the UP or DOWN button to select the resolution. c) Press the OK button to confirm and press the MENU button to exit. B: Frame rate: to select “Frame rate”, press the a) Press the UP or DOWN button RIGHT button for 2 options: 30FPS or 15FPS; to select the frame rate; b) Press the UP or DOWN button c) Press the OK button to confirm and press the MENU button to exit. C: White balance See page 5 for detail set up. D: Audio Recording: .
English d): Press the SHUTTER button again to stop recording. 6.2 Delete audio files See page 4 for detail set up 6.3. Play video /audio file on TV You can play video/audio file on TV by connecting the AV cable： a): Power on TV and switch to AV mode; b): Power on the camera and connect it to TV by the AV cable; c): Press the MODE button to enter the PLAYBACK mode; to select the file. Press the d): Press LEFT or RIGHT button SHUTTER button to play and press it again to end the playing.
English 7：Image review setup: In image playback mode, press the “MENU” button to enter the main menu for 2 options: “play” and “Setup”. There are 8 Options in “play” mode: Delete Current, Delete All, lock, thumbnail, set logo, rotate, slideshow. 7.1 Delete image a) Press the UP or DOWN button “delete all”. to select “delete current” or b) Select “Delete Current” to delete the current image. Press the RIGHT button to confirm. c) Select “Delete All” to delete all the images.
English enter thumbnail mode; to select b) Press the LEFT, RIGHT, UP and DOWN button image, then press the OK button to restore the original size. 7.4 Set Logo: You can set the picture you like as the startup logo. a) Press the UP or DOWN button to select “Set logo”, press the RIGHT button for 2 options: “Yes”, “No”; b) Press the UP or DOWN button to select “Yes”; c) Press the OK button to confirm and back to playback mode. 7.
English 8. Other settings A: Language (Abc): a) Power on and press the “MENU” button to enter “Image” and “Setup”; b) Press RIGHT button to select “Setup”; to select “Language (Abc), c) Press the UP or DOWN button d) Press the RIGHT button to enter “Language (Abc)”; e) Press the UP or DOWN button then press the OK button to confirm.
English D: Play Logo to select “ Play Logo ”;l a) Press the UP or DOWN button b) Press the RIGHT button to select “Enable” or “Disable”; c) Press the UP or DOWN button then press the OK button to confirm. to select the operation you need; d) Press the MENU button to exit. Attention: No startup screen is displayed when you select “Disable” E: Light Frequency a) Power on and press the “MENU” button to select “Setup”; b) Press the UP or DOWN button c) Press the RIGHT button button to confirm.
English a) Power on and press the “MENU” button to select “Setup” mode; to select “Buzzer”; press the right b) Press the UP or DOWN button button to select “Enable” or “Disable”, and then press the OK button to confirm. c) Press the MENU button to exit. H: Format a) Power on and press the “MENU” button to select “Setup” mode; b) Press the UP or DOWN button c) Press the RIGHT button memory or SD card.
English Select “PC Camera” mode when you use this camera as a PC camera. Select “Mass Storage” mode when you download, delete or upload file, it can also be used as a removable disk. a) Power on and press the “MENU” button to enter “Setup”; to select “USB Mode”; b) Press the UP or DOWN button c) Press RIGHT button for options: “mass storage” or “PC camera”. d) Press UP or DOWN button to select; e) Press the OK button to confirm and press MENU button to exit.
English Select the installed language 16
English Connect the camera with PC by USB cable, Power on the camera, then press “mode” button to select “PC CAMERA” 17
English An interface “Found new hardware Wizard” appears, select “Yes, this time only”, then click “next”; Select “install the software automatically (Recommended)”, click “next”; 18
English If “hardware installation” interface appears, click “Continue Anyway” ; 19
English If the following interface appears, click “cancel”; An interface “Found new hardware Wizard” appears, select “Yes, this time only”, then click “next”; Select “install the software automatically (Recommended)”, click “next”; 20
English If “hardware installation” interface appears, click “Continue Anyway”; 21
English The installation is finished and now you can use the pc camera function; 2. How to use PC-CAM function 1. Power on the camera, Press the “mode” button to Select “PC camera” 2. Double click the icon “my computer” on the desktop of PC 3.
English 3. How to download the photos Set the USB mode to “mass storage”, and then the camera becomes a removable storage device: a): Connect the USB cable with PC and the camera; b): Double click the icon “my computer” on the desktop of PC; c): Double click “ Vivicam 5399 ” icon d): Double click “DCIM” file folder; e): Copy all the files to your PC. Attention: 1. do not take out the SD card or the batteries when you copy the files to PC, otherwise the files might be destroyed or lost. 2.
English lens and LCD. Do not use rough cloths or abrasive of laundry to avoid the surface scrape of the camera. Do not put the camera in the sun or under the high-temperature environment (such as high temperature tool bag, trolley case and so on). Wait few minutes before use when you bring the camera from a low temperature environment to a warm environment. 2.
English internal settings and functions of the camera; z The following situation will affect the lifetime of the battery: z LCD turn on; z LCD in playback status for a long time. Please replace new battery when battery low, and follow the battery instruction on when using. Please take out the battery if you won’t use the camera for a long time. Don’t insert the leakage, eroded or inflated battery into the camera. Note: if you use rechargeable battery, please full charge the battery before using. 3.
English b. Insert the card into the camera; c. Power on c. Press the “MENU” button to enter “setup”: d. Press the UP or DOWN button e. Press the RIGHT button for 2 options: “Yes”, “No”. Then press the UP or DOWN button to select “yes”; f. Press the OK button to format the memory card. to select “format”; Attention: do not pull out the card or take out the battery when formatting to avoid any failure of the card.
English IV. Specifications & system requirement: 1 . Specifications of the camera sensor Image resolution 5 Mega pixel CMOS 2592 x 1944, 2048 x 1536, 1600 x 1200, 1280 x 960, 640x 480 storage Internal 32MB Flash, External SD card（8MB to 2GB） File format JPEG, EXIF 2.
English Auto power off 60sec/120sec System required WIN98SE /2000/ME/XP/Vista Weight Approx. 85g(3.0oz)(without batteries and SD card) Dimensions Approx. 85 x 56 x 22mm(3.3x2.2x0.86 in) Attention: The product design and the specifications are subject to change without prior notice. 2.
