User's Manual

ManualsBrandsVivitar ManualsAudio EquipmentBluetooth Headphone

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.

This warranty covers the original consumer purchaser only and is not transferable.

This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or

workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warranty

Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions

from other than normal use, including but limited to, repair by unauthorized parties, tampering, modiﬁcation or

accident.

To Obtain Warranty Service and Troubleshooting Information:

Call 1-800-592-9541 in the U.S. or visit our website at www.vivitar.com.

To receive Warranty service along with the name and address of an authorized product service center, the original

consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the

form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s),

MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send

any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a

valid return address to the authorized service center at your expense. Do not include any other items or

accessories with the defective product. Any products received by the authorized service center that are not

covered by warranty will be returned unrepaired.

Package Contents

When using your headphones, basic safety precautions should always be followed, including the following:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES.

2. Do not use your headphones near water. Clean using a dry or slightly moist cloth.

3. Do not place your headphones on any wet surfaces.

4. Do not allow children or the inﬁrm to play with your headphones without adult supervision.

5. Do not expose your headphones to excessive heat, ﬂames or ﬁre.

6. Always press all buttons carefully. Do not manhandle your headphones.

7. Do not use in extremely dry environments, as this can lead to static discharge during usage.

8. Do not expose your headphones to temperatures above 40°C. Keep out of direct sunlight.

9. Do not attempt to repair this product yourself. Contact a qualiﬁed service center if your headphones are in need of service.

10. Do not drop, puncture or expose your headphones to excessive trauma.

11. Your headphones are not intended for commercial use.

12. Do not place near objects that generate a strong magnetic ﬁeld.

13. Use only the supplied charging cables. Unplug this device when not in use for long periods of time or during lightning storms.

14. Use a soft cloth to clean your headphones Never use any harsh chemicals or detergents. Make sure your earphones are dry

before charging.

15. Please recycle or dispose of your earphones properly based on the laws and rules of your municipality. Contact local

recycling facilities and/or the manufacturer of your earphones for further information.

- Wireless Headphones

- USB Charging Cable

-User’s Manual with Warranty Information

FCC Statement

USER’S MANUAL

ITEM VWC105

Vivitar One Year Warranty

Safety Precautions

Rechargeable Battery Provides Up to 10 Hours Playtime Per Charge

Compact and Flexible

Compatible with Bluetooth Enabled Devices

Play/Pause/Answer Calls

Comfortable Headband and Earcups

Light Weight Reduces Headset Fatigue

Features

Bluetooth Version:

5.0

Bluetooth Range:

Up to 33 feet (10 meters)

Battery Type:

160mAh lithium ion battery

Charge Time:

1~2 hours

Play Time:

Up to 10 hours*

*Applicable at 50% of maximum volume. Results will be lower when volume is higher.

Speciﬁcations

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under

license. Other trademarks and trade names are those of their respective owners.

Thank you for purchasing the Vivitar Wireless Headphone with Flexible Mic, item VWC105. Use your headphone when working at home or staying in touch with family and

friends. Please read this manual carefully FIRST in order to get the most out of your headphone.

USER’S MANUAL

ITEM V

FCCID: 2AL9B-VWC105

WC105

A Quick Look Charging Bluetooth Pairing

Next Track/ Volume +

Previous Track/ Volume -

LED Indicator Light

Power/Play/Pause/

Answer/Voice Assistant

Micro USB

Plug

USB

Plug

(red) = Charging

(blue) = Charging Complete

2. Insert the USB

charging cable’s Micro

USB plug into the

charging port on your

headphones.

1. Press and hold the power button to power on your headphones.

3. Insert the USB

charging cable’s

standard USB plug into

the USB port of a

computer or suitable

USB charging adapter.

4. The LED indicator

light turns red while

the headphones are

charging then turns

blue once charging is

complete.

1. The included USB

charging cable has a

Micro USB plug and a

standard USB plug.

2. The LED indicator lights will alternately ﬂash red and blue to

indicate that your headphones are in pairing mode.

3. Go to the Bluetooth settings menu on your phone. Make sure

that Bluetooth is turned on. Connect to the device listed as

“WFH_V1.”

4. The LED indicator light will slowly ﬂash blue to indicate that

your headphones are paired with your phone.

Pairing Mode

Red & Blue Flashing LED

WFH_V1

Paired

Blue Slowly Flashing LED

Press and hold the power button to

power on or power off your headphones.

Press the PLAY/PAUSE button to play

or pause a track.

Press the Previous Track/ Volume -

Button to decrease the volume. Press and

hold to return to the last track in a playlist.

Press the Next Track/ Volume +

Button to increase the volume. Press and

hold to advance to the next track in a playlist.

Press the Answer button to accept or end a

phone call. Press and hold to reject an

incoming call.

Press and hold the VOICE ASSISTANT button

for 1s to activate Siri or Google Voice Assistant.

210.0 mm

148.0 mm

A.16.0003-15656 VWC105说明书(2021),80g书写纸,单黑印刷(FCC ID: 2AL9B-VWC105) Bluetooth Headphone