WIRELESS USER’S MANUAL I RLT6006-CM
Important Safety Precautions When using your Realtree LED Lantern Wireless Speaker, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER. 2. Clean using a soft cloth or paper towel. 3. Do not allow children or the infirm to play with your speaker without adult supervision. 4. Do not expose your speaker to excessive heat, flames or fire. 5. Always press all buttons or switches carefully. Do not manhandle your speaker. 6.
Introduction Thank you for purchasing the Realtree LED Lantern Wireless Speaker, item RLT6006-CM. You can use your speaker with most smartphones and Bluetooth devices to stream music wirelessly. In order to get the best results when using this device, please read this manual first before using. Package Contents -RLT6006-CM Realtree LED Lantern Wireless Speaker -USB Charging Cable -User’s Manual with Warranty Information Specifications Bluetooth Version: JL5.
A Quick Look at Your Device Front View Rear View Status Indicator Light Mic Charging Port Light Button Previous Track/ Volume Down Power Button Play/Pause/Answer Next Track/ Volume Up Charging Indicator Light
Charging Your Speaker Micro USB Plug USB Plug 1. The USB charging cable has a Micro USB 2. Insert the USB charging cable’s Micro plug and a standard USB plug. USB plug into the Charging Port on the back of your speaker. 4. The Charging Indicator Light turns red while the speaker is charging. And turns off when it is fully charged. 3. Insert the USB charging cable’s standard USB plug into the USB port of a computer or suitable USB charging adapter.
Bluetooth Pairing RLT6006 Pairing Mode Blue Flashing Power Button 1. Press and hold the Power Button to turn on your speaker. 2. The Status Indicator Light will turn blue and flash rapidly to indicate that your speaker is in pairing mode. 3. Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as “RLT6006.” TWS Pairing You can use the TWS feature to pair two of the same model speakers together. To do so, follow the steps below.
Using Your Wireless Speaker Press Play/Pause 1. Press the Light button repeatedly to turn 2. Press the Play/Pause button to play a the lantern’s light on or off. track. Press it again to pause a track. - Volume Down (Press & Hold) Previous Track Next Track 3. Press the Next Track, or Previous Track buttons to skip ahead to the next track or return to the previous track. + Volume Up (Press & Hold) 4. Press and hold the + Button to increase the volume.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Vivitar One Year Warranty (continued) This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.
