Specifications

11
Setting an Access Password (Security Lock)
To prevent unauthorized use of the Qumi, you can create a password. When the access
password function is enabled, the password must be entered after the Qumi has been
turned on.
Creating a password can be done by performing the following steps:
1.
Press the MENU button on the
remote control or press MENU
on the keypad to open the
On-Screen Display (OSD)
menu.
2.
Move the cursor to the Settings
1 tab and scroll down to select
Advanced 1.
3.
Press the ▲ or ▼ button to
select Security Lock and press
.
4.
Press the ◄ or ► button to
enable or disable the security
lock function.
A password dialog box
automatically appears.
5.
You can use the ▲▼◄►
buttons located either on top
of the Qumi or on the remote
control to enter the password.
Any combination of the
navigation buttons can be used
(ve must be chosen).
Press the navigation buttons in
any order to set the password.
Then press the MENU button to
exit the dialog box.