Specifications

12
6.
The password conrmation
menu appears when you
power on the Qumi when the
Security Lock is enabled.
Enter the password that was
created in step 5.
Important:
Keep the password in a safe place. Without the password, you will not be able to use
the Qumi. If you lose the password, contact your reseller for information on resetting the
password.
Using a Tripod
The Qumi can be used with a tripod by connecting
the tripod to the bottom of the Qumi. Many typical
tripods can be connected.
Supported Tripod Specications:
• Type: Mini tripod
• Slot size: 1/4-20 L6.3 mm
Adjusting Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Ensure the cables are in a safe location. You could trip over them.
To adjust the angle of the picture, turn the tilt-adjuster right or left until the desired angle
has been achieved.
！
Note:
The tilt-adjuster is designed to be detachable. Adjust it 1.8cm counterclockwise and rotate
it to release.