Specifications

41
Settings 2 Menu
To access the Settings 2 menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Settings 2 menu.
3. Press the ▲ or ▼ button to move the cursor up and down in the Settings 2 menu
and press .
4. Press the ◄ or ► button to change values for each applicable setting.
ITEM DESCRIPTION
Auto Source
Press the ◄ or ► button to enable or disable automatic source
detection.
No Signal Power Off
(min)
Press the ◄ or ► button to automatically turn the projector lamp
off when there is no signal.
Auto Power On Press the ◄ or ► button to enable or disable automatic power on.
LED Mode
Press the ◄ or ► button to select the LED mode for higher
brightness or lower brightness to save LED life.
Reset All
Press to reset all items to factory preset values. See Reset All
on page 42.
Status
Press to enter the Status menu. See Status on page 43.
Advanced 1
Press to enter the Advanced 1 menu. See Advanced 1 on page
44.
Advanced 2
Press to enter the Advanced 2 menu. See Advanced 2 on page
45.