User's Manual

35
FAQs
1. Is it possible to connect Qumi to a game console, such as a Microsoft® Xbox
or Sony® Playstation?
Yes, Qumi can be used to display content from an Xbox or Playstation console. This
can be done by connecting the HDMI cable from the game console to Qumi.
2. Can Qumi project content from a television?
Watching television content can be done by connecting a cable box, digital set-top
box or satellite receiver directly to Qumi. For example, if a cable box is used, it can
be connected by an HDMI cable to Qumi.
3. How are images from a USB storage device displayed?
Images and other content can be displayed by connecting the following devices to
Qumi:
• USB flash drive
• microSD card
Once the devices are connected, images can be displayed by using the Qumi Photo
Player.
4. Which cable is required for video devices to be connected with Qumi?
Video devices can be connected to Qumi by using an HDMI cable if the video devices
contain an HDMI appropriate output port.
5. What type of video formats does Qumi support?
AVI//VOB/MOV/MKV/DAT/MPG/MP4
6. What type of audio formats does Qumi support?
MP3/WMA/M4A/AAC
7. What type of photo formats does Qumi support?
JPG/JPEG/BMP/PNG
8. What type of document formats does Qumi support?
Qumi does not support document playback (Example: Microsoft® Office, Adobe®
PDF or TXT).
9. How long will the LED light source in Qumi last and can it be replaced?
Qumi does not use a typical light source. It uses a set of Light Emitting Diodes (LED)
to illuminate and project images. LED’s have a greater lifespan than conventional
lamps. The Qumi’s LED is estimated to last for approximately 20,000 hours. The
lifespan of the LED depends on factors such as brightness, usage, environmental
conditions. LED brightness can decrease over time. The LED module is not
replaceable.
10. Why do I need to re-adjust the focus on my Qumi after it’s powered up?
For the best picture quality, adjustment of the projector’s Focus-Dial may be
necessary once the operational temperature has been met.