Flip Down Ceiling TV and Monitor Mount Instruction Manual SKU: MOUNT-M-FD37B Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-m-fd37b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
ASSEMBLY STEPS STEP 1 Push arm against ceiling plate of Mount (A) to release lock and rotate the arm. Pressed Push A STEP 2 Using 4mm Allen Wrench (B), loosen the bolts to the VESA plate height adjustment so the VESA plate can freely move.
STEP 3 OPTION A: Wood Beam Ceiling Hold mount (A) to mounting surface and mark drill holes with pencil. Drill 2.5” (64mm) deep holes using a 1/8” (3mm) drill bit. Insert screws (W-A) into front two holes, leaving 3mm of thread exposed. Slide mount onto front two screws. Insert screws (W-A) with washer (W-C) into back two holes. Tighten all screws. (NOTE: Wood beam must have a width of at least 5” to properly support the mount) 2.5�(64mm) Ø1.8” (3mm) (0.
STEP 3 (Continued) OPTION B: Concrete Ceiling Hold mount (A) to mounting surface and mark drill holes with pencil. Drill 2.5” (64mm) deep holes using a 5/16” (8mm) drill bit. Insert anchors (W-B). Insert screws (W-A) into front two holes, leaving 3mm of thread exposed. Slide mount onto front two screws. Insert screws (W-A) with washer (W-C) into back two holes. Tighten all screws. 2.
STEP 4 X Loosely install screws (M-A through M-D) depending on your TV’s needs. Leave about 0.25” (6mm) sticking out of the TV. TV TV TV TV M-A M-B M-C M-D STEP 5 Install the TV onto the Mount (A) using the keyholes. Install the remaining two screws (M-A through M-D). Fully tighten all screws using a Phillips screwdriver.
Option B STEP 6 Tighten VESA plate height adjustment bolts using the 4mm Allen Wrench (B) once positioned at desired height. Adjust swivel hinge with 6mm Allen Wrench (C). Push the TV all the way up to the ceiling to engage the lock, securing the TV in the raised position. Push up again to disengage the lock and lower the TV.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 01/12/2021 REV1 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. help@vivo-us.com AVG.