User Manual

5
OPTION B: Wood Stud Wall Installation
Using marked locations, drill 1.6” (40mm) deep holes using a 1/8” (3mm) drill bit. Mount
the brackets (A2) to the wall using ST4.2x35mm screws (B) with washers (F).
NOTE: If only one bracket aligns with a stud, refer to “Option C: Drywall Installation” for the
other bracket.
STEP 6
1/8”
OPTION A: Under Desk Installation
Using marked locations, drill 3/8” (10mm) deep holes using a 1/8” (3mm) drill bit. Mount
the brackets (A2) to the desk using ST4.8x19mm screws (C).