Black Projector Ceiling Mount Instruction Manual SKU: MOUNT-VP01B Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-vp01b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. Drill 30lbs (13.61kg) Phillips Screwdriver ASSEMBLY STEPS STEP 1 OPTION A: Above Ceiling Cable Management If cables will be hidden above the ceiling, route cables through large opening in Ceiling Mount (A). A OPTION B: Below Ceiling Cable Management If cables are located below ceiling, route cables through the side of Ceiling Mount (A).
STEP 2 OPTION A: Wood Ceiling Joist Installation Align holes in ceiling plate with wood ceiling joist and mark drilling locations. Use of a stud finder is recommended for finished ceilings. Drill 55mm (2.2”) deep holes using 4.5mm or 3/16” drill bit. Secure Ceiling Mount (A) to stud using ST6x56 Screws (W-A) with D6 OD-18 Washers (W-C). Do not use Concrete Anchors (W-B). X W-C W-A A OPTION B: Concrete Ceiling Installation Mark drilling locations in ceiling. Drill 60mm (2.
STEP 3 Align arms on Mounting Bracket (B) with mounting holes in projector, and secure to projector using Screws (M-A through M-D) and Washers (M-E through M-H) most appropriate for your projector. If your projector has 3 mounting holes, simply remove one of the arms. M-A/M-B/M-C/M-D M-E/M-F/M-G/M-H B B STEP 4 Hang Mounting Bracket (B) with projector over pre-installed screws on Ceiling Mount (A), making sure plastic oval washers are between the plate and mount.
STEP 5 Secure Mounting Bracket (B) using M5x12 Screws (M-I), D5 OD-10 Washers (M-J) and D5 OD-10 Plastic Washers (M-K). Tighten with 4mm Allen Wrench (T-A).
STEP 6 Adjust angle and rotation of projector using 4mm Allen Wrench (T-A).
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 08/04/2021 REV1 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S www.vivo-us.com AVG.