User Manual

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
5.95lbs
(2.70kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
OPTION A: Clamp Installation
As delivered, the clamp (B) will fit a desktop thickness of 35-80mm. To fit a desk thickness of 10-45mm,
remove the two bolts using the 6mm Allen wrench (L), then reassemble at alternate height. Attach
decorative cover (C) to clamp (B). Attach pole (E) to clamp (B) with bolts (G) using 4mm allen wrench
(K).
35-80mm
L
10-45mm
L
C
B
E
K
G