User's Manual

ViVOpay 4800 User Guide 3
Chapter 2
Installing the ViVOpay 4800
Overview
Radio Frequency Interference
To perform contactless transactions, the ViVOpay 4800 uses a radio frequency antenna. The range
(reading distance) and performance of the reader can be affected by other radio frequency emitters
and proximity to metal.
For best performance, adhere to the following guidelines:
• Do not position the ViVOpay 4800 closer than 1 foot (30 cm) to ViVOpay 4800s or other
(non-NFC) RF-emitting devices. Some environments may require greater distances.
• Do not position the ViVOpay 4800 near radio transmitters.
• Avoid placing the ViVOpay 4800 on or near large metal objects.
Installing the ViVOpay 4800
This section describes how to install the ViVOpay 4800. The basic steps are:
• Connect to power and POS
• Mount if required
• Test the installation
Connecting the ViVOpay 4800
Connection to the ViVOpay 4800 is through the molded connector on the terminal side of the
reader’s AVX data cable.
Pin 1
10
1
2
1 : DC power connector
2 : Data port 10P8C modular connector