User's Manual
Table Of Contents
ViVOpay 8100 User Guide 12
Installing the ViVOpay 8100
Mounting the ViVOpay 8100 to a Surface
The ViVOpay 8100 can be mounted to a surface to prevent it from being accidently dislodged or
repositioned.
To mount the ViVOpay 8100
1. Drill four 3.5mm (9/64 inch) holes in the surface where the ViVOpay 8600 will be mounted.
Use the hole spacing shown in Figure 4.
Figure 4. Mounting hole locations
2. Position the ViVOpay 8100 over the mounting holes and use four M3 screws (not supplied)
long enough to secure the ViVOpay 8100 to the mounting surface.
Mounting Holes x4
76.20 mm
3.0 inches
76.20 mm
3.0 inches