User's Manual

ViVOtech Proprietary 9 ViVOpay 8600 User Guide
8. Plug the data cable into the RJ45 socket directly beside the power socket.
9. Carefully slide the connector cover back into place being careful to align the cables into
the slots. On
e cable should be in each slot.
10.Secure the connector cover using the Phillips screw.
11.Place the stylus in the holder at the back of the ViVOpay 8600.
12.Attach the serial data cable from the ViVOpay 8600 to the appropriate port on the POS.
13.Plug in the power adapter. The ViVOpay 8600 emits a double beep and the left LED
illumi
nates. The LCD backlight turns on.
Note: It takes approximately 30-45 seconds for the ViVOpay 8600 to boot up once
powe
r is applied. The unit is not usable until the Welcome screen appears.
Note: The socket on the left in the above illustration is an Ethernet port and is
currently unused. Do not plug the data cable into this port.
Draft dated 120508