User's Manual
Table Of Contents
ViVOpay 8800 User Guide 13
Installing the ViVOpay 8800
Surface Mounting the ViVOpay 8800
The ViVOpay 8800 can be mounted to a surface to prevent it from being accidently dislodged or
repositioned.
To mount the ViVOpay 8800
1. Drill four 3.5mm (9/64 inch) holes in the surface where the ViVOpay 8600 will be
mounted. Use the hole spacing shown in Figure 4.
Figure 4. Mounting hole locations
2. Position the ViVOpay 8800 over the mounting holes and use four M3 screws (not
supplied) long enough to secure the ViVOpay 8800 to the mounting surface.
Mounting Holes x4
76.20 mm
3.0 inches
76.20 mm
3.0 inches