User's Manual

ViVOpay 8800 User Guide 25
Appendix A
Specifications
ViVOpay 8800 Specifications
For detailed specifications, see the ViVOpay 8800 Technical Specifications.
Regulatory Compliance
FCC Part 15 Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
RF Interface
Frequency 13.56 MHz
Standard ISO 14443 Type A/B
Physical
Length 215.4 mm (8.48 in)
Width 149.2 mm (5.87 in) maximum
Depth 51.1 mm (2.01 in)
Weight 0.57 Kg (1.25 lbs)
Environmental
Operating Temp. 0 to 40° C (32 to 104° F)
Storage Temp. -10 to 70° C (-14 to 158° F)
Relative Humidity 10 to 85% non-condensing
Operating Environment Indoor only
Power
Voltage 9-12 Vdc regulated, +/- 10%
Consumption 13.5 W maximum