User's Manual

ViVOtech Confidential 5 ViVOpay 5000™ User Guide
Configuring the Cable
When installing the ViVOpay 5000, the cables should be threaded through the stand as follows:
1. Thread the POS cable through both stand pieces prior to attaching them to the
ViVOpay 5000.
2. Ensure the cable and power cords are connected to the reader.
3. Snap both stand pieces to the rear of the ViVopay unit.
Depending on the lane set up, installers can bolt the stand to the counter top or
leave it free standing.
Note that the cables can be routed between the stand and ViVOpay unit as shown
below.
4. Attach the cable to the POS.
5. Plug in the power adapter.