User manual

VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: [phone]| F: [phone]| E: [e-mail]
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T : 408-773-8686 | F : 408-773-8298 | E : [e-mail]
VIVOTEK Europe
Randstad 22-133, 1316BW Almere, The Netherlands
T: [phone] E: [e-mail]
100m 100m
48W consumpon
Speed Dome
95W PoE Injector
AP-FXC-0110
PoE IN
Green ON LAN: Data is being transmitted or received.
Yellow ON PWR: PoE IN port is connected to PSE.
OFF No connection.
Power OUT#
Green ON LAN: Data is being transmitted or received.
Yellow ON PWR: PoE OUT port is connected to PD.
OFF No connection.
1. Install the device in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the extender are not blocked.
3. Use CAT5 or 6 UTP/STP cables. Avoid using low-quality cables, which will seriously limit the cabling distance.
AP-FXC-0110, AP-FXC-0210 PoE Extender
Quick Installation Guide
AP-FXC-0110: 1 PoE IN - to - 1 PoE OUT.
AP-FXC-0210: 1 PoE IN - to - 2 PoE OUT.
The AP-FXC-0110/0210 is a PoE extender capable of receiving 95W power from PSE. Multiple extenders can be
cascaded to increase the cabling distance.
IMPORTANT
:
INTRODUCTION
LED DEFINITIONS
CONNECTION
• 1x PoE extender • 1x Quick Installation Guide
PACKAGE CONTENTS
Allspecicationsaresubjecttochangewithoutnoice.
Copyright © 2017 VIVOTEK INC. All rights reserved.
Following are the conditions for making the cabling:
1.Use18~19Ω,24AWGCAT5cables.
2. Typical VIVOTEK cameras stream size feature = 1080p@30fps - 6Mbps; 720p@30fps - 3Mbps.
Make sure the combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch.
NOTE: There are power losses due to cable resistance.
100m 100m100m
95W PoE Injector
802.3af PoE Camera
PoE CameraPoE Camera 802.3af802.3at
AP-FXC-0210
AP-FXC-0210
DIP#
ON Turn on PoE output for the PoE out port.
OFF Turn off PoE output for the PoE out port.
Note: For the AP-FXC-0110, DIP 1 is not functional.
DIP SWITCH DEFINITIONS