Quick Installation Guide

For example,

IRmode_Auto

FF 01 00 18 02 02 1D

IRmode_DI

FF 01 00 18 02 03 1E

IRmode_CMD

FF 01 00 18 02 04 1F

LightSensorGate FF 01 00 18 03 LL CKSM When the IR Mode Light Sensor Auto,

the Lux value to turn IR LED can be

LL: Lux, changes is made by

every10Lux

For example:

LightSensorGate = 100

FF 01 00 18 03 0A 26

LightSensorGate = 200

FF 01 00 18 03 14 30

The parameters of IR illuminator can be controlled via the RS485 connection. You can

enable the connection in

> PTZ > Mechanical window. Select the defaults

for the IR illuminator: Pelco D, baud rate - 2400, Data bits - 8, Stop bit - 1, Parity - none.

Defaults for IR:

Pelco D

2400

none

Customizable IR control