Quick Installation Guide

2
I
Model Number AE-510 AE-510-I
Power Input 24V AC 24V AC
Power Output 12VDC, 24VAC 12VDC, 24VAC
Power Consumption Window heater: 5W;
Fan: 2W;
Window heater: 5W;
Fan: 2W;
IR LED: 12W;
Wiper: 6W
VAIR Illuminator N/A 850nm
50m@40°, 140m@10°
Environmental
Operation Temp.
-20°C ~ +65°C -20°C ~ +50°C
Window heater ON/OFF < 30°C (86°F) ON
>30°C (86°F) OFF
≤ 20°C (68°F) ON
≥ 30°C (86°F) OFF
Blower Control >30°C (86°F) ON
< 30°C (86°F) OFF
≥35°C (95°F) ON
≤ 25°C (77°F) OFF
Protection Level IP68, IK10 IP68, IK10 (IP66 w/ wiper)
Construction AISI 316L stainless steel AISI 316L stainless steel
Dimensions 460 (L) x 172 (W) x 163.5
(H) mm
460 (L) x 172 (W) x 242.5
(H) mm
Net Weight 7.5kg 8kg
Cable Grants PG16 x 2 PG16 x 2
UNPACKING:
Unpack carefully. Electronic components can be damaged if improperly handled or
dropped. If an item appears damaged in shipment, place it properly in its carton and
notify the shipper.
IMPORTANT!:
1. Read and follow Instructions: All operating and user instructions should be read and
followed before the unit is to be operated.
connections.
If you plan to install this camera housing into a tropical, sea coastal, or an environment
where salt water or corrosive industrial waste water/moist are present, please seal each
This will help prevent
electrolysis to occur and extend the life span of the camera and housing.
IMPORTANT:
1. Disconnect devices: A readily accessible disconnect device in the building installation wiring
should be incorporated.
2.