User's Manual

Distance/Power Table
AP-FHP-0105-T
Length of Ethernet Cable (Cat 6) Power with AA-420 65 Watt Power with PoE Switch 30 Watt
Power with
AP-GIC-011A-060 60 Watt
AP-GIC-011A-095 95 Watt*
300 m (984 ft) 41.2 W 8.8 W 27.7 W
500 m (1,640 ft) 23.9 W 5 W 17.2 W
800 m (2,625 ft) 14.7 W - 10.5 W
1000 m (3,281 ft) 11.7 W - 8.2 W
1200 m (3,937 ft) 8.8 W - 5.9 W
2400 m (7,873 ft) Data only (100Mbps) Data only (100Mbps) Data only (100Mbps)
NOTE:
1. The power table is measured by VIVOTEK's PoE switch and PoE injector.
2. The length of network cable for camera and switch connection is 1m Cat6 cable.
3. The power delivery will vary depending on the quality of Cat6 cable used due to variations in resistance.
*Due to the current limit and resistance in long length, the output will be the same as 60 Watt.
Solution Kit
Ordering Information
Model Content Description P/N
AP-FHP-0100-R AP-FHP-0100-R
1 Port Hyper PoE Rx Module,
PoE input
900057600G
AP-FHP-0105-R AP-FHP-0105-R + AA-420
1 Port Hyper PoE Rx Module, USA 100216800G
1 Port Hyper PoE Rx Module, EU 100216810G
1 Port Hyper PoE Rx Module, UK 100216820G
1 Port Hyper PoE Rx Module, AU 100216830G
1 Port Hyper PoE Rx Module, JP 100216840G
AP-FHP-0105-T AP-FHP-0105-T 1 Port Hyper PoE Tx Module 900057700G
DC input
Network Switch
Power
Ethernet Cable
AA-420
AP-FHP-0105-R
Camera
AP-FHP-0105-T
PoE Switch
AP-FHP-0100-R
Camera
AP-FHP-0105-T
PoE input
Network Switch
Note: VIVOTEK's Hyper PoE Rx modules are only compatible with Hyper PoE Tx modules
Note: It is not recommended to install these in outdoor environments
PoE Injector
AP-FHP-0100-R
Camera
AP-FHP-0105-T