User Manual

User Manual rev. 1.0. Feb. 2016
105
2-5.3.2 TACACS+
Web Interface
To configure a Common Configuration of AAA, TACACS+ in the web interface:
Figure 2-5.3.2: The TACACS+ Authentication Server Configuration
Parameter description:
Global Configuration
These setting are common for all of the TACACS+ servers.
 Timeout
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a
TACACS+ server before it is considered to be dead.
 Deadtime
Deadtime, which can be set to a number between 0 to 1440 minutes, is the period during
which the switch will not send new requests to a server that has failed to respond to a
previous request. This will stop the switch from continually trying to contact a server that it
has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only if
more than one server has been configured.
 Key