User Manual

User Manual rev. 1.0. Feb. 2016
117
Parameter description:
Configuration Identification
 Configuration Name :
The name identifying the VLAN to MSTI mapping. Bridges must share the name
and revision (see below), as well as the VLAN-to-MSTI mapping configuration in
order to share spanning trees for MSTI's (Intra-region). The name is at most 32
characters.
 Configuration Revision :
The revision of the MSTI configuration named above. This must be an integer
between 0 and 65535.
 MSTI :
The bridge instance. The CIST is not available for explicit mapping, as it will
receive the VLANs not explicitly mapped.
 VLANs Mapped :
The list of VLANs mapped to the MSTI. The VLANs can be given as a single (xx, xx
being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be
separated with comma and/or space. A VLAN can only be mapped to one MSTI.
An unused MSTI should just be left empty. (I.e. not having any VLANs mapped to
it.) Example: 2,5,20-40.