User Manual

User Manual rev. 1.0. Feb. 2016
131
Interface Channel Setting (of the MVR VLAN) will be shown besides the Edit
symbol.
 Port
The logical port for the settings.
 Port Role
Configure an MVR port of the designated MVR VLAN as one of the following roles.
Inactive: The designated port does not participate MVR operations.
Source: Configure uplink ports that receive and send multicast data as source
ports. Subscribers cannot be directly connected to source ports.
Receiver: Configure a port as a receiver port if it is a subscriber port and should
only receive multicast data. It does not receive data unless it becomes a member
of the multicast group by issuing IGMP/MLD messages.
Be Caution: MVR source ports are not recommended to be overlapped with
management VLAN ports. Select the port role by clicking the Role symbol to
switch the setting. I indicates Inactive; S indicates Source; R indicates Receiver.
The default Role is Inactive.
 Immediate Leave
Enable the fast leave on the port.