User Manual

User Manual rev. 1.0. Feb. 2016
191
 Selected: Classify only selected DSCP for which classification is enabled as specified
in DSCP Translation window for the specific DSCP.
 All: Classify all DSCP.
 Egress :
Port Egress Rewriting can be one of below parameters
 Disable: No Egress rewrite.
 Enable: Rewrite enable without remapped.
 Remap: DSCP from analyzer is remapped and frame is remarked with remapped
DSCP value.
 Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
 Auto-refresh :
To evoke the auto-refresh icon then the device will refresh the information automatically.
 Upper right icon (Refresh):
You can click them for refresh the QoS Port DSCP information by manual.