User Manual

User Manual rev. 1.0. Feb. 2016
195
Parameter description:
 DSCP :
Maximum number of supported DSCP values are 64 and valid DSCP value ranges from 0 to
63.
 Ingress :
Ingress side DSCP can be first translated to new DSCP before using the DSCP for QoS
class and DPL map.
There are two configuration parameters for DSCP Translation –
1. Translate : DSCP at Ingress side can be translated to any of (0-63) DSCP values.
2. Classify : Click to enable Classification at Ingress side.
 Egress :
There are following configurable parameters for Egress side –
1. Remap DP0 : Select the DSCP value from select menu to which you want to
remap. DSCP value ranges form 0 to 63
2. Remap DP1 : Select the DSCP value from select menu to which you want to
remap. DSCP value ranges form 0 to 63.
There is following configurable parameter for Egress side -
 Remap: Select the DSCP value from select menu to which you want
to remap. DSCP value ranges form 0 to 63.
 Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
 Auto-refresh :
To evoke the auto-refresh icon then the device will refresh the information automatically.
 Upper right icon (Refresh):
You can click them for refresh the DSCP Translation information by manual.