User Manual

User Manual rev. 1.0. Feb. 2016
212
2-22. sFlow
The sFlow Collector configuration for the switch can be monitored and modified here. The
configuration is divided into two parts: Configuration of the sFlow receiver (a.k.a. sFlow
collector) and configuration of per-port flow and counter samplers.
sFlow configuration is not persisted to non-volatile memory, which means that a reboot or
master change will disable sFlow sampling.
Web Interface
To configure the sFlow Agent in the web interface:
1. Click Configuration, sFlow
2. Set the parameters
3. Click the save to save the setting
4. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
.
Figure 2-22: The sFlow Configuration