User Manual

User Manual rev. 1.0. Feb. 2016
21
Recurring Configuration
 Start time settings:
Week - Select the starting week number.
Day - Select the starting day.
Month - Select the starting month.
Hours - Select the starting hour.
Minutes - Select the starting minute.
 End time settings:
Week - Select the ending week number.
Day - Select the ending day.
Month - Select the ending month.
Hours - Select the ending hour.
Minutes - Select the ending minute.
 Offset settings:
Offset - Enter the number of minutes to add during Daylight Saving Time. ( Range:
1 to 1440 )
NOTE: The under “Start Time Settings” and “End Time
Settings” was displayed what you set on the “Start Time
Settings” and “End Time Settings” field information.
 Buttons
These buttons are displayed on the NTP page:
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.