User Manual

User Manual rev. 1.0. Feb. 2016
260
Rx
Responses
radiusAccClientExtResponses
The number of RADIUS packets (valid
or invalid) received from the server.
Rx
Malformed
Responses
radiusAccClientExtMalformedR
esponses
The number of malformed RADIUS
packets received from the server.
Malformed packets include packets with
an invalid length. Bad authenticators or
unknown types are not included as
malformed access responses.
Rx
Bad
Authenticators
radiusAcctClientExtBadAuthenti
cators
The number of RADIUS packets
containing invalid authenticators received
from the server.
Rx
Unknown Types
radiusAccClientExtUnknownTy
pes
The number of RADIUS packets of
unknown types that were received from
the server on the accounting port.
Rx
Packets Dropped
radiusAccClientExtPacketsDrop
ped
The number of RADIUS packets that
were received from the server on the
accounting port and dropped for some
other reason.
Tx
Requests
radiusAccClientExtRequests
The number of RADIUS packets sent to
the server. This does not include
retransmissions.
Tx
Retransmissions
radiusAccClientExtRetransmissi
ons
The number of RADIUS packets
retransmitted to the RADIUS accounting
server.
Tx
Pending Requests
radiusAccClientExtPendingRequ
ests
The number of RADIUS packets destined
for the server that have not yet timed out
or received a response. This variable is
incremented when a Request is sent and
decremented due to receipt of a
Response, timeout, or retransmission.
Tx
Timeouts
radiusAccClientExtTimeouts
The number of accounting timeouts to the
server. After a timeout, the client may
retry to the same server, send to a
different server, or give up. A retry to the
same server is counted as a retransmit as
well as a timeout. A send to a different
server is counted as a Request as well as
a timeout.
Other Info
This section contains information about the state of the server and the latest round-trip time.
Name
RFC4670 Name
Description
IP Address
-
IP address and UDP port for the accounting server in
question.
State
-
Shows the state of the server. It takes one of the following
values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is
not yet up and running.
Ready: The server is enabled, IP communication is up and
running, and the RADIUS module is ready to accept
accounting attempts.
Dead (X seconds left): Accounting attempts were made