User Manual

User Manual rev. 1.0. Feb. 2016
268
3-5.4.1.4 Event
This page provides an overview of RMON Event table entries.Each page shows up to 99
entries from the Event table, default being 20, selected through the "entries per page" input
field. When first visited, the web page will show the first 20 entries from the beginning of the
Event table. The first displayed will be the one with the lowest Event Index and Log Index
found in the Event table .
The "Start from Event Index and Log Index" allows the user to select the starting point in the
Event table. Clicking the button will update the displayed table starting from that or the next
closest Event table match.
The will use the last entry of the currently displayed entry as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table. Use the button to
start over.
Web Interface
To configure a RMON Event Overview in the web interface:
1. Click Security, Switch, RMON,then Event.
2. Checked “Auto-refresh”.
3. Click “ Refresh“ to refresh the port detailed statistics
4. Specify Port which wants to check.
Figure 3-5.4.1.4: RMON Event Overview
Parameter description:
 Event Index
Indicates the index of the event entry.
 Log Index
Indicates the index of the log entry.
 LogTIme
Indicates Event log time
 LogDescription
Indicates the Event description.
 Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refresh: Click to refresh the page immediately.