User Manual

User Manual rev. 1.0. Feb. 2016
309
 VLAN ID
VLAN ID for which the Port members are displayed.
 Port Members
A row of check boxes for each port is displayed for each VLAN ID.
If a port is included in a VLAN, an image will be displayed.
If a port is included in a Forbidden port list, an image will be displayed.
If a port is included in a Forbidden port list and dynamic VLAN user register VLAN on same
Forbidden port, then conflict port will be displayed as .
 VLAN Membership
The VLAN Membership Status Page shall show the current VLAN port members for all
VLANs configured by a selected VLAN User (selection shall be allowed by a Combo Box).
When ALL VLAN Users are selected, it shall show this information for all the VLAN Users,
and this is by default. VLAN membership allows the frames classified to the VLAN ID to be
forwarded on the respective VLAN member ports.
Navigating the VLAN Monitor page
Each page shows up to 99 entries from the VLAN table, default being 20, selected through
the "entries per page" input field. When first visited, the web page will show the first 20
entries from the beginning of the VLAN Table. The first displayed will be the one with the
lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table.
Clicking the “Refresh” button will update the displayed table starting from that or the
closest next VLAN Table match. The “ >> ”will use the last entry of the currently displayed
VLAN entry as a basis for the next lookup. When the end is reached the text "No more
entries" is shown in the displayed table. Use the “ |<< ”button to start over.
 Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh: Click to refresh the page.