User Manual

User Manual rev. 1.0. Feb. 2016
34
 Type :
Display which type of the pool is.
Network: the pool defines a pool of IP addresses to service more than one DHCP client.
Host: the pool services for a specific DHCP client identified by client identifier or hardware address.
If "-" is displayed, it means not defined.
 IP :
Display network number of the DHCP address pool.
If "-" is displayed, it means not defined.
 Subnet Mask :
Display subnet mask of the DHCP address pool.
If "-" is displayed, it means not defined.
 Lease Time :
Display lease time of the pool.
 Buttons
Add New Pool - Click to add a new DHCP pool.
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.