User Manual

User Manual rev. 1.0. Feb. 2016
40
The name identifying the user. This is also a link to Add/Edit User.
 Password
To type the password. The allowed string length is 0 to 255, and the allowed
content is the ASCII characters from 32 to 126.
 Password (again)
To type the password again. You must type the same password again in the field.
 Privilege Level :
The privilege level of the user. The allowed range is 1 to 15. If the privilege level
value is 15, it can access all groups, i.e. that is granted the fully control of the
device. But others value need to refer to each group privilege level. User's
privilege should be same or greater than the group privilege level to have the
access of that group. By default setting, most groups privilege level 5 has the
read-only access and privilege level 10 has the read-write access. And the system
maintenance (software upload, factory defaults and etc.) need user privilege level
15. Generally, the privilege level 15 can be used for an administrator account,
privilege level 10 for a standard user account and privilege level 5 for a guest
account.
 Buttons
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.
Cancel - Click to undo any changes made locally and return to the Users.
Delete User - Delete the current user. This button is not available for new
configurations (Add new user)