User Manual

User Manual rev. 1.0. Feb. 2016

System: Contact, Name, Location, Timezone, Daylight Saving Time, Log.

Security: Authentication, System Access Management, Port (contains Dot1x port,

MAC based and the MAC Address Limit), ACL, HTTPS, SSH, ARP Inspection, IP

source guard.

IP: Everything except 'ping'.

Port: Everything except 'VeriPHY'.

Diagnostics: 'ping' and 'VeriPHY'.

Maintenance: CLI- System Reboot, System Restore Default, System Password,

Configuration Save, Configuration Load and Firmware Load. Web- Users, Privilege

Levels and everything in Maintenance.

Debug: Only present in CLI.

 Privilege Levels

Every group has an authorization Privilege level for the following sub groups:

configuration read-only, configuration/execute read-write, status/statistics

read-only, status/statistics read-write (e.g. for clearing of statistics). User

Privilege should be same or greater than the authorization Privilege level to have

the access to that group.

 Buttons

Apply – Click to save changes.

Reset - Click to undo any changes made locally and revert to previously saved

values.