User Manual

User Manual rev. 1.0. Feb. 2016

2-5.1.5 HTTPs

This section shows you how to use HTTPS to securely access the Switch. HTTPS is a secure

communication protocol that combines authentication and data encryption to provide secure

encrypted communication via the browser.

Web Interface

To configure a HTTPS Configuration in the web interface:

1. Select “Enabled” in the Mode of HTTPS Configuration.

2. Select “Enabled” in the Automatic Redirect of HTTPS Configuration.

3. Click Apply.

Figure 2-5.1.5: The HTTPS Configuration

Parameter description:

 Mode :

Indicates the HTTPS mode operation. Possible modes are:

Enabled: Enable HTTPS mode operation.

Disabled: Disable HTTPS mode operation.

 Automatic Redirect :

Indicates the HTTPS redirect mode operation. Automatically redirect web browser to

HTTPS when HTTPS mode is enabled. Possible modes are:

Enabled: Enable HTTPS redirect mode operation.

Disabled: Disable HTTPS redirect mode operation.