User Manual

User Manual rev. 1.0. Feb. 2016

"xxxxxxxxxxxx" (x is a hexadecimal digit). A frame that hits this ACE matches

this SMAC value.

 DMAC Filter

Specify the destination MAC filter for this ACE.

Any: No DMAC filter is specified. (DMAC filter status is "don't-care".)

MC: Frame must be multicast.

BC: Frame must be broadcast.

UC: Frame must be unicast.

Specific: If you want to filter a specific destination MAC address with this ACE,

choose this value. A field for entering a DMAC value appears.

 DMAC Value

When "Specific" is selected for the DMAC filter, you can enter a specific

destination MAC address. The legal format is "xx-xx-xx-xx-xx-xx" or

"xx.xx.xx.xx.xx.xx" or "xxxxxxxxxxxx" (x is a hexadecimal digit). A frame that

hits this ACE matches this DMAC value.

 Buttons

Apply – Click to save changes.

Reset- Click to undo any changes made locally and revert to previously saved

values.

 Auto-refresh:

To evoke the auto-refresh to refresh the information automatically.

 Upper right icon (Refresh, clear, Remove All)

You can click them for refresh the ACL configuration or clear them by manual.

Others remove all to clean up all ACL configurations on the table.