User Manual

User Manual rev. 1.0. Feb. 2016

is disabled, the log type of ARP Inspection will refer to the port setting. And the setting of

"Check VLAN" is enabled, the log type of ARP Inspection will refer to the VLAN setting.

Possible setting of "Check VLAN" are:

Enabled: Enable check VLAN operation.

Disabled: Disable check VLAN operation.

Only the Global Mode and Port Mode on a given port are enabled, and the setting of "Check

VLAN" is disabled, the log type of ARP Inspection will refer to the port setting. There are

four log types and possible types are:

None: Log nothing.

Deny: Log denied entries.

Permit: Log permitted entries.

ALL: Log all entries.

 Buttons:

Apply – Click to save changes.

Reset- Click to undo any changes made locally and revert to previously saved

values.