User Manual

User Manual rev. 1.0. Feb. 2016

Specify ARP Inspection is enabled on which VLANs. First, you have to enable the port

setting on Port mode configuration web page. Only when both Global Mode and Port Mode

on a given port are enabled, ARP Inspection is enabled on this given port. Second, you can

specify which VLAN will be inspected on VLAN mode configuration web page. The log type

also can be configured on per VLAN setting.

Possible types are:

None: Log nothing.

Deny: Log denied entries.

Permit: Log permitted entries.

ALL: Log all entries.

 Buttons

Add New Entry: Click to add a new VLAN to the ARP Inspection VLAN table.

Apply: Click to save changes.

Reset: Click to undo any changes made locally and revert to previously saved

values.