User Manual

26
The button is a toggle switch to turn status LED indicators on/off. Because of the opaque front cover
in the IR version, I8 and I9, the LED indicators only can be seen in the non‐IR CaMate products, i.e. w5.
Light sensor sensitivity
There are three pre‐defined levels to configure the light sensor threshold values.
Turn LED on when the ambient light is under 50 % and turn off when the ambient light is above 60%.
Turn LED on when ambient light is under 20 % and turn off when the ambient light is above 30 %.
Turn LED on when ambient light is under 10 % and turn off when the ambient light is above 20 %.
LED dimming
There are four pre‐defined levels to configure the strength of LED lighting.
100%
75%
50 %
25%
The fine‐tune button set the strength of LED lighting from 100% to 20%.