User Manual

6
2. Windows Application Software
After the device driver for the USB-to-RS485 converter is installed (refer to the installation guide that
comes with the USB-to-RS485 converter), execute the EXIR_ConfigurationTool.exe application software.
1. First select the correct COM port that is connected to CaMate.
If you are not sure of the baudrate of CaMate, (default is 38,400), you can use the Baudrate probe icon to
search for the correct baudrate.
2. Then, configure the correct baudrate and click the Find icon. A search device window will prompt to ask
for a start Device ID number. Default is 1. Unless a change to the device ID of your CaMate was made,
otherwise, press OK to start finding from device ID 1. You can press the Stop scan button any time once
your CaMate is found.