User Manual

9
2.1 Configuration/Status Page
2.1.1 Apply change
The Apply change button lets the configuration values take effect. CaMate configuration values will
not be saved until you click the Apply change button.
2.1.2 Update
The Update button is to used to query the CaMate configuration to display on the software. To
ensure the software is displaying the latest information from CaMate, you should use Update
button before you start to configure.
2.1.3 Device Info
Device Info indicates the CaMate model name, e.g., CM48I8‐1040.
2.1.4 LED Status
LED Status depicts the current ON/OFF state of LED. Red means OFF, and Green means ON.
2.1.5 Device ID
Each device comes with a unique Device ID when multiple CaMate devices are present on the RS485
bus. The Device ID ranges from 0 to 127. Make sure you configure different IDs for CaMate devices
bearing the same model name. There are a total of 128 device IDs, i.e. 0 ~ 127. A special Master