Installation Manual

8
CM48I8-1040
Rotate
direction
Full circle Beam angle Single mount Double mount Triple mount
Distance(m) Width(m) Distance(m) Width(m) Distance(m) Width(m)
0 40° 100 72.8 141.4 102.9 173.2 126.1
1 36° 107 69.5 151.3 98.3 185.3 120.4
2 30° 127 68.1 179.6 96.3 220.0 117.9
3 27° 137 65.8 193.7 93.0 237.3 113.9
4 24° 150 63.8 212.1 90.2 259.8 110.4
5 16° 206 57.9 291.3 81.9 356.8 100.3
6 15° 215 56.6 304.1 80.1 372.4 98.1
7 10° 250 43.7 353.6 61.9 433.0 75.8
Counter-clockwide
Narrower
Clockwide
Wider
CM48I8-2040
Rotate
direction
Full circle Beam angle Single mount Double mount Triple mount
Distance(m) Width(m) Distance(m) Width(m) Distance(m) Width(m)
0 40° 120 87.4 169.7 123.5 207.8 151.3
1 36° 125 81.2 176.8 114.9 216.5 140.7
2 29° 150 77.6 212.1 109.7 259.8 134.4
3 27° 158 75.9 223.4 107.3 273.7 131.4
4 20° 200 70.5 282.8 99.7 346.4 122.2
Counter-clockwide
Narrower
Clockwide
Wider
The factory default for the beam angle selector is always at the
Widest
angle.Whenyouturnthe
selector many rounds to its widest or the narrowest position, a
rotation resistance
can be felt. That
means the mechanical stop is reached, and you should not use more force.
RefertothetablesbelowforthecongurableIRlight
beam angles
and the number of
full circles
neededtochangetothepreferredbeamangles.Eachfullcirclecorrespondstoapresetbeamangle.
For example, if you need to change CM48I8-1040's beam angle to 30° (127m), turn the beam angle
selector
Counter-clockwise 2 full circles
. If you are at the narrowest angle (10°) and prefer to turn to
24°,turn3fullcirclesclockwise.Whendone,installthewaterproofcover.
X2
Width
Distance
Angle
X2
30°36°
40°