User Manual

10


Timermode
ThereisanembeddedsystemclcokonCaMatedevices.TheTimermodeallowstheconfigurationof
periodicalON/OFFtimetocontrolLEDautomatically.However,sincethereisnobatteryinCaMate,
thesystemClockwillresettodefaultsettingwhenpowereddown.(Ifyouneedtoimplementa
batterytosustainthesystemclockduringpower‐off,pleasecontactyoursalesrepresentativefor
customizationservice)


Lightsensormode
IntheLightsensormode,theLEDisdirectlycontrolledbythelightsensorstatus.IftheAmbientLight
islowerthantheTriggerLevel,LEDturnsON.IfhigherthantheTriggerlevel,theLEDturnsOFF.

Fadein/out
TheFadein/outcontroldefinestheLEDON/OFFbehavior.IftheFadein/outfunctionisdisabled,the
LEDisturnedONorOFFimmediately.WhentheFadein/outissettoFAST ,theLEDfadesinoroutin1
second,and3secondsifsettoSLOW.Fadein/outcanavoidsuddenLEDON/OFF,whichmaycausethe
occurrenceofover‐exposureorunder‐exposureoncameraimage.ThesuddenON/OFFwillalsocause
discomfortforhumaneyeswhenusingthevisiblelightCaMate,suchasthew5series.