User Manual

3

WindowsApplicationSoftware
Afterthedevicedriverforthe USB ‐to‐RS485converterisinstalled(refertotheinstallationguidethat
comeswiththeUSB‐to‐RS485converter),executetheEXIR_ConfigurationTool.exeapplication
software.


1.FirstselectthecorrectCOMportthatisconnectedtoCaMate.
IfyouarenotsureofthebaudrateofCaMate,(defaultis38,400),youcanusetheBaudrateprobeicon
tosearchforthecorrectbaudrate.


2.Then,configurethecorrectbaudrateandclicktheFindicon.Asearchdevicewindowwillpromptto
askforastartDeviceIDnumber.Defaultis1.UnlessachangetothedeviceIDofyourCaMatewas
made,otherwise,pressOKtostartfindingfromdeviceID1.YoucanpresstheStopscanbuttonany
timeonceyourCaMateisfound.
