Network Camera User's Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

68 - User's Manual

System log

Advanced mode

This section explains how to conﬁgure the Network Camera to send system log to the remote

server as a backup.

Remote Log

You can conﬁgure the Network Camera to send the system log ﬁle to a remote server as a log backup.

Before utilizing this feature, it is suggested to install a log-recording tool to receive system log messages

from the Network Camera. For example, a tool -- Kiwi Syslog Daemon. Visit

http://www.kiwisyslog.com/

kiwi-syslog-daemon-overview/

Follow the steps below to set up the remote log:

1. In the IP address text box, enter the IP address of the remote server.

2. In the port text box, enter the port number of the remote server.

3. When completed, select Enable remote log and click Save to take effect.

Current Log

This column displays the system’s log in chronological order. The system log is stored in the Network

Camera’s buffer area and will be overwritten when reaching a certain amount.