Manual

VIVOTEK
50 - User's Manual
You can click Restore to recall the original
settings without incorporating the changes�
When completed with the settings on this
page, click Save to enable the setting�
You can also click on Profile to adjust all
settings above in a pop-up window for
special lighting conditions�
Exposure
On this page, you can set the Measurement window, Exposure level, Exposure time, and Gain
control settings. Detailed congurations will be automatically adjusted since the sensor library will
automatically adjust the value according to the ambient light�
Sensor Setting 1:
For normal situations
Sensor Setting 2:
For special situations
Activated period: Select the period of time this
profile setting will apply to� Please manually
enter a range of time in a day, tune the White
Balance and Image adjustment settings as
previously described, and then click Save for
the conguration to take effect.
3D Noise Reduction is mostly applied in low-light conditions� When enabled in a low-light
condition with fast moving objects, trails of after-images may occur� You may then select a lower
strength level or disable the function�