User`s manual
Table Of Contents
- Overview
- Accessing the Network Camera
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Using VIVOTEK Recording Software
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Security > User Account
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > DI and DO
- Applications > Tampering detection
- Applications > Audio detection
- Applications > VADP (VIVOTEK Application Development Platform)
- PIR
- Recording > Recording settings
- Local storage > SD card management
- Local storage > Content management
- Appendix
VIVOTEK
192 - User's Manual
audio_linein <boolean> 1 0/99 Indicate whether to support
external line input.
(It will be replaced by audio_mic
and audio_extmic.)
audio_lineout <boolean> 1 0/99 Indicate whether to support line
output.
audio_headphoneout <boolean> 0 0/99 Indicate whether to support
headphone output.
audioin_codec aac4, gamr,
g711
<product
dependent>
g711 0/99 Available codec list for audio input.
audioout_codec <string> g711 0/99 Available codec list for audio
output.
camctrl_httptunnel <boolean> 0 0/99 Indicate whether to support
httptunnel.
camctrl_privilege <boolean> 1 0/99 Indicate whether to support
“Manage Privilege” of PTZ control
in the Security page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
uart_httptunnel <boolean> 0 0/99 Indicate whether to support HTTP
tunnel for UART transfer.
transmission_mode Tx,
Rx,
Both
Tx 0/99 Indicate transmission mode of the
machine: TX = server, Rx =
receiver box, Both = DVR.
network_wire <boolean> 1 0/99 Indicate whether to support
Ethernet.
network_wireless <boolean> 0 0/99 Indicate whether to support
wireless.
wireless_s802dot11b <boolean> 0 0/99 Indicate whether to support
wireless 802.11b+.
wireless_s802dot11g <boolean> 0 0/99 Indicate whether to support
wireless 802.11g.
wireless_s802dot11n <boolean> 0 0/99 Indicate whether to support
wireless 802.11n.