User's Manual
Table Of Contents
- Overview
- Using Web Browsers
- Using VIVOTEK Recording Software
- Using 3GPP-compatible Mobile Devices
- Using RTSP Players
- Main Page
- Client Settings
- Configuration
- System > General settings
- System > Homepage layout
- System > Logs
- System > Parameters
- System > Maintenance
- Media > Image
- Media > Video
- Media > Video
- Media > Audio
- Network > General settings
- Network > Streaming protocols
- Network > SNMP (Simple Network Management Protocol)
- Network > FTP
- Bonjour
- Security > User accounts
- Security > HTTPS (Hypertext Transfer Protocol over SSL)
- Security > Access List
- PTZ > PTZ settings
- Event > Event settings
- Applications > Motion detection
- Applications > Digital input
- Applications > Tampering detection
- Applications > Audio detection
- Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform)
- Recording > Recording settings
- Local storage > Storage management
- Local storage > Content management
- Appendix
VIVOTEK
User's Manual - 203
is 1.
bwmode <boolean> 6/6 Switch to B/W in night mode if enabled.
* Only available when
"capability_daynight_c<0~(n-1)>_
blackwhitemode" is 1.
sensitivity low,normal,high,1~
100
6/6 Sensitivity of day/night control.
There are two value format:
"low,normal,high": if
capability_daynight_c<0~(n-1)>_ircutsensiti
vity_type=options
"1~100": if
capability_daynight_c<0~(n-1)>_ircutsensiti
vity_type=normalize
* Only available when
"capability_daynight_c<0~(n-1)>
_ircutsensitivity_type" is not "-".
spectrum_mode visible,
i r,
irenhanced,
blueenhanced
* Available values
are listed in
"capability_daynight
_c<0~(n-1)>_spect
rum_mode".
6/6 Set spectrum method .
* Only available when
"capability_daynight_c<0~(n-1)>_spectrum_
support" is 1.